HP ProLiant EC200a User Manual Download Page 59

Page: 59 / 73

Support and other resources 59

Support and other resources

Accessing ProLiant Easy Connect Support

For the latest server support information, see the Hewlett Packard Enterprise ProLiant Easy Connect

Support Portal (

https://support.prolianteasyconnect.com

Accessing Hewlett Packard Enterprise Support

•

For live assistance, go to the Contact Hewlett Packard Enterprise Worldwide website

(

http://www.hpe.com/assistance

•

To access documentation and support services, go to the Hewlett Packard Enterprise Support

Center website (

http://www.hpe.com/support/hpesc

Information to collect

•

Technical support registration number (if applicable)

•

Product name, model or version, and serial number

•

Operating system name and version

•

Firmware version

•

Error messages

•

Product-specific reports and logs

•

Add-on products or components

•

Third-party products or components

Websites

•

Hewlett Packard Enterprise Information Library (

http://www.hpe.com/info/enterprise/docs

)

•

Hewlett Packard Enterprise Support Center (

http://www.hpe.com/support/hpesc

)

•

Contact Hewlett Packard Enterprise Worldwide (

http://www.hpe.com/assistance

)

•

Customer Self Repair (

http://www.hpe.com/support/selfrepair

)

Customer Self Repair

Hewlett Packard Enterprise products are designed with many Customer Self Repair (CSR) parts to

minimize repair time and allow for greater flexibility in performing defective parts replacement. If during

the diagnosis period Hewlett Packard Enterprise (or Hewlett Packard Enterprise service providers or

service partners) identifies that the repair can be accomplished by the use of a CSR part, Hewlett Packard

Enterprise will ship that part directly to you for replacement. There are two categories of CSR parts:

•

Mandatory

—Parts for which customer self repair is mandatory. If you request Hewlett Packard

Enterprise to replace these parts, you will be charged for the travel and labor costs of this service.

Summary of Contents for ProLiant EC200a










































































Search results

Summary of Contents for ProLiant EC200a

Reviews:

Related manuals for ProLiant EC200a

Brands by name

Popular brands

HP ProLiant EC200a, User Manual

Search results

Summary of Contents for ProLiant EC200a

Reviews:

Related manuals for ProLiant EC200a

Brands by name

Popular brands