5.
Install the processor memory drawer cover.
6.
Install the processor memory drawer.
7.
Power up the server.
To replace the component, reverse the removal procedure.
Processor
WARNING!
Use caution when installing the processor memory module or removing the processor
memory module. The processor memory module is very heavy when fully populated.
CAUTION:
XNC cabling (
) is required for eight processor systems.
Failure to cable the XNC will result in the lower processor memory drawer not being recognized
by the server.
CAUTION:
Use care when handling components to avoid damaging connector pins.
CAUTION:
To help avoid damage to the processor and system board, do not install the processor
without using the processor installation tool.
CAUTION:
To prevent possible server malfunction and damage to the equipment, multiprocessor
configurations must contain processors with the same part number.
To remove the component:
1.
Power off the server (
“Power off the server” (page 22)
).
2.
Remove the processor memory drawer (
“Remove the upper or lower processor memory drawer
or processor memory drawer blank” (page 26)
).
CAUTION:
To prevent damage to the processor memory drawer cover, be sure the handle
of the processor memory drawer is fully open before removing the cover.
3.
Remove the processor memory drawer cover (
“Remove a processor memory drawer cover”
).
44
Removal and replacement procedures
