HP ProLiant DL60 Gen9, Maintenance And Service Manual

Page: 62 / 113

Removal and replacement procedures 62
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives, power
input modules, and the internal system components to cool before touching them.
CAUTION: To prevent damage to electrical components, take the appropriate anti-static
precautions before beginning any system installation. Improper grounding can cause
electrostatic discharge.
To remove the component:
1.
Power down the server (on page 27 ).
2.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
3.
Do one of the following:
o
Extend the server from the rack (on page 27 ).
o
Remove the server from the rack (on page 30 ).
4.
Remove the access panel (" Access panel " on page 37 ).
5.
Disconnect all cables connected to existing expansion boards.
6.
Remove the PCI riser cage (on page 32 ).
7.
Remove any existing expansion board from the riser board.
8.
Remove the riser board from the cage.