Hardware options installation 73
b.
Disconnect each power cord from the server.
3.
Extend ("
Extend the server from the rack
" on page
23
) or remove the server from the rack.
4.
Remove the access panel (on page
24
).
5.
Disconnect any external cables that are connected to the expansion board.
6.
Disconnect any internal cables that are connected to the expansion board.
7.
Remove the PCIe riser cage ("
Remove the PCI riser cage
" on page
29
).
8.
Remove the expansion slot blank.
To replace the component, reverse the removal procedure.
Installing a half-length expansion board
1.
Power down the server (on page
23
).
2.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
3.
Extend the server from the rack (on page
23
).
4.
Remove the access panel (on page
24
).
5.
Remove the PCI riser cage (on page
29
).
6.
Remove the expansion slot blank ("
Removing the expansion slot blanks
" on page
72
).
Summary of Contents for ProLiant DL380p Gen8
