HP ProLiant DL380 G3 Setup And Installation Manual Download Page 79

Page: 79 / 95

System Setup and Configuration for Red Hat Linux 7.3 Professional

Before configuring the packaged cluster:

•

Be sure you have sufficient software rights to install the operating system and
software applications on each server node.

Be sure all hardware is installed and properly cabled.

NOTE:

For additional information on installing and configuring Linux and LifeKeeper on a

ProLiant server, refer to the following websites:

•

HP high availability—

www.hp.com/servers/proliant/highavailability

•

HP Linux solutions—

www.hp.com/linux

•

Linux for ProLiant—

www.hp.com/products/servers/linux

•

LifeKeeper for Linux documentation—

http://licensing.steeleye.com/support/docm.php

•

Obtaining LifeKeeper for Linux license key—

http://licensing.steeleye.com/download/index.php

•

Linux—

www.linux.org

•

Red Hat Linux—

www.redhat.com

•

RPM Package Manager (RPM)—

www.rpm.org

7-2

HP ProLiant DL380 Generation 3 Packaged Cluster Setup and Installation Guide

HP CONFIDENTIAL

Codename: Sopwith Part Number: 252621-002 Last Saved On: 11/8/02 3:06 PM

Summary of Contents for ProLiant DL380 G3
































































































Search results

Summary of Contents for ProLiant DL380 G3

Reviews:

Related manuals for ProLiant DL380 G3

Brands by name

Popular brands

HP ProLiant DL380 G3, Setup And Installation Manual

Search results

Summary of Contents for ProLiant DL380 G3

Reviews:

Related manuals for ProLiant DL380 G3

Brands by name

Popular brands