Description
Status
Over Temp LED
Off = Normal
Amber = High system temperature detected
Amp Status LED
Off = Disabled
Solid Green = Advanced Memory Protection active
Solid Amber = Memory failure has occurred
Flashing Amber = Invalid AMP memory configuration
Power Cap LED
Off = System is in standby, or no cap is set
Solid Green = Power cap applied
Related Links
DVD-RW problems
Symptoms
• System does not boot from the drive
• Data read from the drive is inconsistent, or drive cannot read data
• Drive is not detected
HP documentation reference(s)
Troubleshooting Guide Volume 1: Internal system problems
Troubleshooting Guide Volume 1: CD - ROM and DVD drive problems
Troubleshooting a DVD-R/W drive
About this task
Follow the steps below to troubleshoot a DL360p G8 SRVR DVD-R/W Drive HP 9.5mm SATA.
Warning:
Eliminate the risk of electric shock by removing all AC power from the system before installing
or replacing any non hot-plug hardware option. Disconnect all power cords to completely
remove power from the server. Always follow Avaya's application procedures when shutting
down the server.
Warning:
To reduce the risk of personal injury from hot surfaces, allow the drives and the internal system
components to cool before touching them.
Procedure
1. If system is not booting from drive:
a. Be sure there are no loose connections
Internal server components
September 2013
Maintaining and Troubleshooting the HP ProLiant DL360p G8 Server
21
