HP ProLiant DL100 G2 DPSS Page 144 Administration Manual Download

Page: 144 / 155

Japanese notice

Korean notice A&B

Class A equipment

Class B equipment

Safety

Battery replacement notice

WARNING!

The computer contains an internal lithium manganese dioxide, a vanadium pentoxide, or an alkaline

battery pack. A risk of

re and burns exists if the battery pack is not properly handled. To reduce the

risk of personal injury:

•

Do not attempt to recharge the battery.

•

Do not expose the battery to temperatures higher than 60

C (140

F).

•

Do not disassemble, crush, puncture, short external contacts, or dispose of in

re or water.

Batteries, battery packs, and accumulators should not be disposed of together with the general

household waste. To forward them to recycling or proper disposal, please use the public collection system

or return them to HP, an authorized HP Partner, or their agents.

144

Regulatory compliance and safety

Summary of Contents for ProLiant DL100 G2 DPSS




























































































































































Search results

Summary of Contents for ProLiant DL100 G2 DPSS

Reviews:

Related manuals for ProLiant DL100 G2 DPSS

Brands by name

Popular brands

HP ProLiant DL100 G2 DPSS, Administration Manual

Search results

Summary of Contents for ProLiant DL100 G2 DPSS

Reviews:

Related manuals for ProLiant DL100 G2 DPSS

Brands by name

Popular brands