HP ProLiant BL465c Gen8, Maintenance And Service Manual

Page: 27 / 82

Removal and replacement procedures 27
To replace the component, reverse the removal procedure.
DIMM baffle
To remove the component:
1.
Power down the server blade (on page 22 ).
2.
Remove the server blade (on page 23 ).
3.
Remove the access panel (" Access panel " on page 24 ).
CAUTION: Always disconnect the drive cables from the SAS controller before removing the
DIMM baffle. Failure to do so may result in damage to the SAS controller.
4.
Disconnect the drive cables from the SAS controller.
5.
Remove the DIMM baffle.