Removal and Replacement Procedures
5. Raise the locking lever to release the processor (1), and remove the processor (2).
Figure 2-8: Removing the processor
To replace the processor:
CAUTION:
When installing the processor into the socket, be sure that the locking
lever is raised to avoid damaging pins.
1. With the locking lever raised, insert the processor with the edges properly aligned.
2. Lower the locking lever.
3. Remove the thermal interface media cover from the new heatsink.
Figure 2-9: Removing the thermal interface media cover
HP ProLiant BL20p Generation 2 Server Blade Maintenance and Service Guide
2-11
HP CONFIDENTIAL
Codename: Part Number: 316078-001 Last Saved On: 4/3/03 1:22 PM
