Removal and Replacement Procedures
2-6
HP ProLiant BL20p Generation 3 Server Blade Maintenance and Service Guide
3.
Remove the server blade from the server blade enclosure:
a.
Press the release button (1).
CAUTION:
After you press the release button, the server blade is unlocked from the
enclosure. Use both hands to support the server blade when you remove it from the rack.
b.
Open the lever (2).
c.
Grasp the lever and slide the server blade from the enclosure (3). Place a hand under
the server blade to support it as you remove it from the enclosure.
Figure 2-2: Removing the server blade from the server blade
enclosure
d.
Place the server blade on a flat, level surface.
CAUTION:
Always populate server blade enclosure bays with either a server blade or server
blade blank. Operating the enclosure without a server blade or server blade blank results in
improper airflow and improper cooling that can lead to thermal damage.
To install and power up a server blade, reverse the removal procedure. Server blades are set
to power up automatically upon insertion. If you have changed this setting, use the power
button or iLO Virtual Power Button feature to power up the server blade.
For more information about iLO, refer to the
HP
Integrated Lights-Out User Guide
.
