The Configuration Menu
SNMP Configuration
Command:
/cfg/snmp
[SNMP Menu]
name - Set SNMP "sysName"
locn - Set SNMP "sysLocation"
cont - Set SNMP "sysContact"
rcomm - Set SNMP read community string
wcomm - Set SNMP write community string
trap1 - Set first SNMP trap host address
trap2 - Set second SNMP trap host address
t1comm - Set community string for first trap host
t2comm - Set community string for second trap host
auth - Enable or disable SNMP "sysAuthenTrap"
linkt - Enable or disable SNMP link up/down trap
cur - Display current SNMP configuration
The GbE Interconnect Switch software supports SNMP-based network management. If you
are running an SNMP network management station on your network, you can manage the
GbE2 Interconnect Switch using SNMP MIBs. Refer to the
HP ProLiant BL p-Class GbE2
Interconnect Switch User Guide
for a list of SNMP MIBs.
The following table describes the
SNMP Configuration Menu
options.
Table 6-18: SNMP Configuration Menu Options
Command Description
name
<new string, maximum 64
characters>
Configures the name for the system. The name
can have a maximum of 64 characters.
locn
<new string, maximum 64
characters>
Configures the name of the system location.
The location can have a maximum of 64
characters.
cont
<new string, maximum 64
characters>
Configures the name of the system contact. The
contact can have a maximum of 64 characters.
rcomm
<new SNMP read community
string, maximum 32 characters
>
Configures the SNMP read community string.
The read community string controls SNMP “get”
access to the GbE2 Interconnect Switch. It can
have a maximum of 32 characters. The default
read community string is public.
wcomm
<new SNMP write community
string, maximum 32 characters>
Configures the SNMP write community string.
The write community string controls SNMP “set”
and “get” access to the GbE2 Interconnect
Switch. It can have a maximum of 32
characters. The default write community string
is private.
trap1
<new SNMP trap host IP
address (such as, 192.4.17.101)>
Configures the IP address of the first SNMP trap
host using dotted decimal notation. The SNMP
trap host is the device that receives SNMP trap
messages from the GbE2 Interconnect Switch.
continued
HP ProLiant BL p-Class GbE2 Interconnect Switch Command Reference Guide
6-23
HP CONFIDENTIAL
Codename: Strawberry Part Number: 331404-001 Last Saved On: 7/17/03 12:57 PM
