manualshive.com logo in svg

HP ProDesk 400 G7 SFF, Maintenance And Service Manual

Share
Download
HP ProDesk 400 G7 SFF Maintenance And Service Manual Download Page 118

Backing up information and creating recovery media

These methods of creating recovery media and backups are available on select products only.

Using Windows tools for backing up

HP recommends that you back up your information immediately after initial setup. You can do this task either 
using Windows Backup locally with an external USB drive or using online tools.

IMPORTANT:

Windows is the only option that allows you to back up your personal information. Schedule 

regular backups to avoid information loss.

NOTE:

If computer storage is 32 GB or less, Microsoft System Restore is disabled by default.

Using the HP Cloud Recovery Download Tool to create recovery media (select products 

only)

You can use the HP Cloud Recovery Download Tool to create HP Recovery media on a bootable USB flash drive.

For details:

▲

Go to 

http://www.hp.com/support

, search for HP Cloud Recovery, and then select the result that matches 

the type of computer that you have.

NOTE:

If you cannot create recovery media yourself, contact support to obtain recovery discs. Go to 

http://www.hp.com/support

, select your country or region, and then follow the on-screen instructions.

IMPORTANT:

HP recommends that you follow the 

Restoring and recovery methods on page 111

 to restore your 

computer before you obtain and use the HP recovery discs. Using a recent backup can return your machine to a 
working state sooner than using the HP recovery discs. After the system is restored, reinstalling all the operating 
system software released since your initial purchase can be a lengthy process.

110 Chapter 10   Backing up, restoring, and recovering

ENWW

Summary of Contents for ProDesk 400 G7 SFF









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands