Speaker
Follow these steps to remove the speaker:
1.
Prepare the computer for disassembly (see
Preparation for disassembly on page 21
).
2.
Remove the access panel (see
3.
Position the computer with the front panel toward you.
4.
Disconnect the speaker cable (1) from the system board.
5.
Remove the two Torx-15 M3.5×8.5 screws (2) that secure the speaker to the computer chassis.
6.
Remove the speaker (3).
Reverse this procedure to install the speaker.
24
Chapter 4 Removal and replacement procedures
