HP ProCurve Series 2810, Management And Configuration Manual

Page: 23 / 420

Getting Started
Conventions
■ Braces ( < > ) enclose required elements.
■
Braces within square brackets ( [ < > ] ) indicate a required element
within an optional choice.
■ Boldface indicates use of a CLI command, part of a CLI command
syntax, or other displayed element in general text. For example:
“Use the
copy tftp
command to download the key from a TFTP server.”
■ Italics indicate variables for which you must supply a value when
executing the command. For example, in this command syntax,
< port-
list >
indicates that you must provide one or more port numbers:
Syntax: aaa port-access authenticator < port-list >
Command Prompts
In the default configuration, your switch displays one of the following CLI
prompts:
ProCurve Switch 2810#
To simplify recognition, this guide uses
ProCurve
to represent command
prompts for all models. For example:
ProCurve#
(You can use the
hostname
command to change the text in the CLI prompt.)
Screen Simulations
Figures containing simulated screen text and command output look like this:
ProCurve(config)# show version
Image stamp: /sw/code/build/bass(ppne_swt)
Mar 17 2006 11:44:02
N.10.XX
2624
Boot Image: Primary
Build Options: QA
Watchdog: ENABLED
Figure 1-1. Example of a Figure Showing a Simulated Screen
1-3