SROS Command Line Interface Reference Guide
Crypto Map IKE Command Set
5991-2114
© Copyright 2007 Hewlett-Packard Development Company, L.P.
1228
antireplay
Use the
antireplay
command to enable antireplay sequence number checking for all security associations
created on this crypto map. Use the
no
form of this command to disable.
Syntax Description
No subcommands.
Default Values
By default, this command is enabled.
Usage Examples
The following example enables antireplay sequence checking on crypto map VPN 100:
ProCurve(config)#
crypto map VPN 100 ipsec-ike
ProCurve(config-crypto-map)#
antireplay