manualshive.com logo in svg

HP ProCurve NAC 800, User Manual, Page: 44 / 591

Share
Download
HP ProCurve NAC 800 User Manual Download Page 44

Clusters and Servers

Overview

2-2

Overview

NAC 800 uses clusters and servers. A "cluster" is a logical grouping of one or 
more ESs that are managed by one MS. 

A single-server installation is one where the MS and ES are on one server. The 
ES is assigned to a Default cluster. This configuration is illustrated in figure 2-
1.

A multiple-server installation is one where the MS is on one server and there 
are one or more ESs on separate servers. Each ES must be assigned to a 
cluster. This configuration is illustrated in figure 2-2.

The responsibilities of the MS and ES are as follows:

■

MS 

•

Configuration

•

NAC policies

•

Quarantining

•

Endpoint activity

•

License

•

Test updates

■

ES 

•

Testing

•

Access control

The quarantine method is defined per cluster; all of the ESs in a given cluster 
use the same quarantine method (Inline, DHCP, or 802.1X). When using 
multiple clusters, each cluster can have a different quarantine method. Clus-
ters cooperate to test and control access to the network, although the ESs in 
each cluster are not able to communicate with any ES in any other cluster.

Summary of Contents for ProCurve NAC 800
















































































































































































































































































































































































































































































































































































































Reviews:

No comments