HP ProCurve NAC 800, User Manual

Page: 439 / 591

System Administration
System Settings
15-11
Resetting your Test Data
There are times when you may wish to revert to the as-shipped state for test
data; clearing the database of all endpoints and test results, and resetting
SAPQ and DHCP leases.
To reset your test data to the as-shipped state:
Command line window
1. For single-server installations:
a. Log in as root to the NAC 800 MS, either using SSH or directly with a
keyboard.
b. Run the script by entering the following at the command line:
resetTestData.py
2. For multiple-server installations:
a. Stop the
nac-es
service on all ESs:
i. Log in as
root
to each NAC 800 ES, either using SSH or directly
with a keyboard.
ii. Enter the following at the command line:
service nac-es stop
b. Stop the
nac-ms
service on the MS:
i. Log in as
root
to the NAC 800 MS, either using SSH or directly
with a keyboard.
ii. Enter the following at the command line:
service nac-ms stop
c. Run the script on each ES:
i.
Log in as
root
to each NAC 800 ES, either using SSH or directly
with a keyboard.
ii. Enter the following at the command line:
resetTestData.py
d. Run the script on the MS:
i.
Log in as
root
to each NAC 800 MS, either using SSH or directly
with a keyboard.