manualshive.com logo in svg

HP ProCurve NAC 800, User Manual, Page: 434 / 591

Share
Download
HP ProCurve NAC 800 User Manual Download Page 434

System Administration

System Settings

15-6

System Settings

DNS/Windows Domain Authentication and 
Quarantined Endpoints

In order to satisfy the following scenarios:

■

A guest user gets redirected

■

A user is redirected if their home page is the Intranet 

■

The only host that is resolved is the domain controller (DC); and no 
other intranet hosts are resolved.

■

Windows domain authentication can take place from quarantine with 
minimal configuration

Perform the following steps:

1.

Configure the domain suffixes in the quarantine areas to a placeholder, 
such as the following:

quarantine.bad

2.

Enter the full domain controller hostnames in the System 
configuration>>Accessible services area (for example, 
dc01.mycompany.com, dc02.mycompany.com).

3.

Ensure that each ES has a valid, fully qualified domain name (FQDN) and 
that the domain portion matches the domain for the registered windows 
domain.

4.

Ensure that each ES is configured with one or more valid DNS servers 
that can fully resolve (both A and PTR records) each ES. 

5.

Ensure that the following ports on the domain controller/active directory 
(DC/AD) servers are available from quarantine: 

•

88

•

389

•

135-139

•

1025

NAC 800 will then lookup the Kerberos and LDAP services, and resolve those 
services within its own DNS server used for quarantined devices.

For example: 

Summary of Contents for ProCurve NAC 800
















































































































































































































































































































































































































































































































































































































Reviews:

No comments