HP ProCurve NAC 800, User Manual

Page: 129 / 591

System Configuration
Quarantining, 802.1X
3-81
b. Enter the Password used to log into this device's console.
c. To help confirm accuracy, type the same password you entered into
the
Password
field in the
Re-enter Password
field.
d. Enter the Enable mode user name that is used to enter enable mode on
this device.
e. Enter the Password used to enter enable mode on this device.
f. To help confirm accuracy, type the same password you entered into
the
Enable
password field in the
Re-enter Password
field.
g. Enter the amount of time, in milliseconds, before an idle open SSH
session is reset. The default is 60000 (60 seconds) in the
Reconnect
idle time
field.
8. Telnet settings:
a. Enter the
User name
used to log into this device's console.
b. Enter the Password used to log into this device's console.
c. To help confirm accuracy, type the same password you entered into
the
Password field in the Re-enter Password field.
d. Enter the
Enable mode user name
that is used to enter enable mode on
this device.
e. Enter the Password used to enter enable mode on this device.
f. To help confirm accuracy, type the same password you entered into
the
Enable password field in the Re-enter Password field.
g. Enter the amount of time, in milliseconds, before an idle open Telnet
session is reset. The default is 60000 (60 seconds) in the
Reconnect
idle time field.
9. SNMPv2 settings:
a. Enter the Community string used to authorize writes to SNMP objects.
b. Enter the OID used to re-authenticate an endpoint in the
Re-
authenticate OID
text field. The strings "${Port}" and "${MAC}" will be
substituted for the port and MAC address of the endpoint to be re-
authenticated.
c. Select the type of the re-authentication OID from the
OID type
drop-
down list:
–
INTEGER
– unsigned INTEGER
– TIMETICKS
– IPADDRESS
– OBJID
– STRING
– HEX STRING