HP ProCurve 8116fl, Installation And Getting Started Manual

Page: 24 / 134

Introducing the ProCurve Series 8100fl Switch
ProCurve Switch 8100fl Features
In
trodu
cin
g
the
ProCurve
Series 8100fl Switch
ProCurve Switch 8100fl Features
The Series 8100fl Switch hardware provides wire-speed performance
regardless of the performance monitoring, filtering, and Quality of Service
(QoS) features enabled by the software.
ProCurve 8100fl switches support the following features:
■ Hot swapping on:
• Interface modules that can be installed in any order and combination
• Management module (when a redundant management module is
online)
• Switch fabric modules (when a redundant fabric module is online)
• Power supply (when a redundant supply is online)
• Supported mini-GBICs and transceivers
■ High performance:
• Switch 8108fl—160 Gbps aggregate switching capacity in each switch
fabric module; 80Gbps system throughput
• Switch 8116fl—320Gbps aggregate switching capacity in each switch
fabric module; 160Gbps system throughput
• Up to 238 million packets-per-second non-blocking routing
throughput
■ Full-duplex operation on all ports
■
Easy management of the switch through the following interfaces:
• Simple Network Management Protocol (SNMP) v1/v2
• Full-featured command line interface (CLI)
■ Hardware redundancy (see “Hot Swapping and Redundancy” on page 4-4
for details):
• (Optional) redundant power supply
• (Optional) redundant management module
• (Optional) redundant switch fabric module
■ Automatic routing switch failover provides hot standby redundancy using
standards-based VRRP (Virtual Router Redundancy Protocol)
■ Switch management login security:
• Terminal Access Controller Access Control System ()
• Remote Authentication Dial In User Service (RADIUS)
• Secure Session Shells (SSH) version 1.5 and 2.0
1-14