HP ProCurve 8116fl, Installation And Getting Started Manual

Page: 18 / 134

In
trodu
cin
g
the
ProCurve
Series 8100fl Switch
Introducing the ProCurve Series 8100fl Switch
Front of the Switch
Interface Module LEDs
Interface modules have LEDs showing activity and link status by port, plus a
Status LED at the bottom showing the operational status of each module. LED
function and behavior differs according to module (refer to the following
tables for details).
Table 1-3. 1-Port 10GB LR Module (J8733A) LEDs
1-Port 10GB LR Module LED Color State Meaning
LR port
Activity and
Link LEDs
Activity
(Act) Green
Green
Off
Flashing
Solid
Flashing
Transmitting data.
Link is up; no data is being transferred.
When no connector is plugged into the
port, the LED will flash approximately
once every few seconds. This on/off cycle
is a safety feature known as Auto Laser
Shutdown.
Link Green
n/a
Solid
Off
Link is up.
No connector is plugged into the port.
Status LED
Status n/a
Green
Green
Yellow/
Orange
Off
Flashing
Solid
Flashing
No power to the module.
Module is powering up and downloading
operating software.
Software image loaded successfully.
Self-test failure.
N o t e
This module was discontinued in Summer 2006. The 2-Port X2 10Gbe Module
(J8737A) shown on
page 1-12 , provides functionally-equivalent LR
connectivity (with separate purchase of LR transceivers) in a two port X2,
media-flexible package.
1-8