HP ProCurve 2810-24G, Management And Configuration Manual

Page: 114 / 272

5-14
Multiple Instance Spanning-Tree Operation
802.1s Multiple Spanning Tree Protocol (MSTP)
Operating Rules
■ All switches in a region must be configured with the same set of VLANs,
as well as the same MST configuration name and MST configuration
number.
■ Within a region, a VLAN can be allocated to either a single MSTI or to the
region’s IST instance.
■ All switches in a region must have the same VID-to-MST instance and VID-
to-IST instance assignments.
■ There is one root MST switch per configured MST instance.
■ Within any region, the root switch for the IST instance is also the root
switch for the region. Because boundary ports provide the VLAN connec-
tivity between regions, all boundary ports on a region's root switch should
be configured as members of all static VLANs defined in the region.
■ There is one root switch for the Common and Internal Spanning Tree
(CIST). Note that the per-port
hello-time parameter assignments on the
CIST root switch propagate to the ports on downstream switches in the
network and override the
hello-time configured on the downstream switch
ports.
■ Where multiple MST regions exist in a network, there is only one active,
physical communication path between any two regions, or between an
MST region and an STP or RSTP switch. MSTP blocks any other physical
paths as long as the currently active path remains in service.
■ Within a network, an MST region appears as a virtual RSTP bridge to other
spanning tree entities (other MST regions, and any switches running
802.1D or 802.1w spanning-tree protocols).
■ Within an MSTI, there is one spanning tree (one physical, communication
path) between any two nodes. That is, within an MSTI, there is one
instance of spanning tree, regardless of how many VLANs belong to the
MSTI. Within an IST instance, there is also one spanning tree across all
VLANs belonging to the IST instance.
■ An MSTI comprises a unique set of VLANs and forms a single spanning-
tree instance within the region to which it belongs.
■ Communication between MST regions uses a single spanning tree.
■ If a port on a switch configured for MSTP receives a legacy (STP/802.1D
or RSTP/802.1w) BPDU, it automatically operates as a legacy port. In this
case, the MSTP switch interoperates with the connected STP or RSTP
switch as a separate MST region.
■ Within an MST region, there is one logical forwarding topology per
instance, and each instance comprises a unique set of VLANs. Where
multiple paths exist between a pair of nodes using VLANs belonging to