HP ProCurve 1600M, Management And Configuration Manual

Page: 165 / 690

Interface Access and System Information
System Information
Configure a System Name, Contact, and Location for the Switch. To
help distinguish one switch from another, configure a plain-language identity
for the switch.
Syntax: hostname < name-string >
snmp-server [contact < system-contact >] [location < system-location >]
Each field allows up to 255 characters.
For example, to name the switch “Blue” with “Next-4474” as the system
contact, and “North-Data-Room” as the location:
New hostname, contact,
and location data from
previous commands.
Additional System
Information
Figure 7-8. System Information Listing After Executing the Preceding Commands
The menu interface will only display up to 47 characters although you can
specify a name up to 255 characters in length. A message beginning with “+”
displays if the name exceeds 47 characters. You can use the CLI
show running,
show config , or show system-information commands to see the complete text.
The menu interface is shown in Figure 7-9.
7-13