HP ProCurve 1400-24G, Installation And Getting Started Manual

Page: 19 / 48

2-9
Installing the Switch
Installation Procedure
In
sta
llin
g
th
e
Sw
itc
h
Wall Mounting
You can mount the switch on a wall with either the front or rear panel facing
up.
W A R N I N G
For safe operation, please read the “Installation Precautions” on
page 2-2 and page 2-3 , before mounting the switch.
It is recommended the switch be mounted with the ports facing up or
downward.
C a u t i o n
The switch should be mounted only to a wall or wood surface that is at least
1/2-inch (12.7 mm) plywood or its equivalent.
1. Use a #1 Phillips (cross-head) screwdriver and attach the mounting
brackets to the switch with the included 8-mm M4 screws.
2. Attach the switch to the wall or wood surface with two 5/8-inch
(15.875 mm) number 12 wood screws (not included).