HP ProBook x360 435 G7 Maintenance And Service Manual Download

Page: 67 / 92

Using HP Sure Recover (select products only)

Select computer models are configured with HP Sure Recover, a PC OS recovery solution built into the
hardware and firmware. HP Sure Recover can fully restore the HP OS image without installed recovery
software.

Using HP Sure Recover, an administrator or user can restore the system and install:

●

Latest version of the operating system

●

Platform-specific device drivers

●

Software applications, in the case of a custom image

To access the latest documentation for HP Sure Recover, go to

http://www.hp.com/support

. Select Find your

product, and then follow the on-screen instructions.

Restoring and recovery

Summary of Contents for ProBook x360 435 G7





























































































Search results

Summary of Contents for ProBook x360 435 G7

Reviews:

Related manuals for ProBook x360 435 G7

Brands by name

Popular brands

HP ProBook x360 435 G7, Maintenance And Service Manual

Search results

Summary of Contents for ProBook x360 435 G7

Reviews:

Related manuals for ProBook x360 435 G7

Brands by name

Popular brands