Optical drive
NOTE:
All optical drive spare part kits include an optical drive bezel.
Description
Spare part number
DVD±RW SuperMulti DL LightScribe Drive
647673-001
Blu-ray ROM DVD±RW SuperMulti DL LightScribe Drive
647674-001
DVD-ROM Drive
647672-001
Before removing the optical drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the optical drive:
1.
Position the computer upside-down with the right side toward you.
2.
Remove the Phillips PM2.5×12.0 captive screw
(1)
that secures the optical drive to the computer.
3.
Push the optical drive tab
(2)
to release the optical drive from the computer.
Component replacement procedures
57
