manualshive.com logo in svg

HP ProBook 635 Aero G7, Maintenance And Service Manual, Page: 87 / 119

Share
Download
HP ProBook 635 Aero G7 Maintenance And Service Manual Download Page 87

NOTE:

HP recommends that you follow the 

Restoring and recovery methods on page 78

 to restore your 

computer before you obtain and use the HP recovery discs. Using a recent backup can return your machine to a 

working state sooner than using the HP recovery discs. After the system is restored, reinstalling all the 

operating system software released since your initial purchase can be a lengthy process.

Changing the computer boot order

If your computer does not restart using the HP Recovery media, you can change the computer boot order, the 

order of devices listed in BIOS for startup information. You can select an optical drive or a USB flash drive, 

depending on the location of your HP Recovery media.

IMPORTANT:

For a tablet with a detachable keyboard, connect the tablet to the keyboard base before 

beginning these steps.

To change the boot order:

1.

Insert the HP Recovery media.

2.

Access the system Startup menu.

●

For computers or tablets with keyboards attached, turn on or restart the computer or tablet, quickly 

press 

esc

, and then press 

f9

 for boot options.

●

For tablets without keyboards, turn on or restart the tablet, quickly press and hold the volume up 

button, and then select f9.

‒ or –

Turn on or restart the tablet, quickly press and hold the volume down button, and then select f9.

3.

Select the optical drive or USB flash drive from which you want to boot, and then follow the on-screen 

instructions.

Using HP Sure Recover (select products only)

Select computer models are configured with HP Sure Recover, a PC operating system (OS) recovery solution built 

into the hardware and software. HP Sure Recover can fully restore the HP OS image without installed recovery 

software.

Using HP Sure Recover, an administrator or user can restore the system and install:

●

Latest version of the operating system

●

Platform-specific device drivers

●

Software applications, in the case of a custom image

To access the latest documentation for HP Sure Recover, go to 

http://www.hp.com/support

. Follow the on-screen 

instructions to find your product and locate your documentation.

Changing the computer boot order

79

Summary of Contents for ProBook 635 Aero G7
























































































































Reviews:

No comments