manualshive.com logo in svg

HP ProBook 635 Aero G7, Maintenance And Service Manual, Page: 62 / 119

Share
Download
HP ProBook 635 Aero G7 Maintenance And Service Manual Download Page 62

3.

Lift the top of the touchpad, and then pull it away from the bottom of the computer to remove it (3).

Reverse this procedure to install the touchpad.

Fan

To remove the fan, use this procedure and illustration.

Table 6-10

Fan description and part number

Description

Spare part number

Fan

M30650-001

Before removing the fan, follow these steps:

1.

Prepare the computer for disassembly (see 

Preparation for disassembly on page 43

).

2.

Remove the bottom cover (see 

Bottom cover on page 35

).

3.

Disconnect the battery cable from the system board (see 

Battery on page 43

).

Remove the fan:

1.

Remove the cables from the clips on the side of the fan (1).

2.

Disconnect the fan cable from the system board (2).

54

Chapter 6  Removal and replacement procedures for authorized service provider parts

Summary of Contents for ProBook 635 Aero G7
























































































































Reviews:

No comments