manualshive.com logo in svg

HP ProBook 470 G1, Maintenance And Service Manual

The HP ProBook 470 G1 boasts a powerful performance and sleek design, making it the perfect companion for professionals on the go. Ensure smooth operation and keep your device running smoothly with the comprehensive Maintenance and Service Manual. Download this manual for free from manualshive.com to unlock the full potential of your ProBook 470 G1.

Share
Download
background image

Fan/heat sink assembly

All fan/heat sink assembly spare part kits include replacement thermal material.

Description

Spare part number

Fan/heat sink assembly

721937-001

Before removing the fan/heat sink assembly, follow these steps:

1.

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn

the computer on, and then shut it down through the operating system.

2.

Disconnect all external devices connected to the computer.

3.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet,

and then unplugging the AC adapter from the computer.

4.

Remove the battery (see 

Battery on page 34

).

5.

Remove the following components:
a.

Service door (see 

Service door on page 35

).

b.

Hard drive (see 

Hard drive on page 36

)

c.

Optical drive (see 

Optical drive on page 39

)

d.

WLAN/Bluetooth module (see 

WLAN/Bluetooth combo card on page 43

)

e.

Keyboard (see 

Keyboard on page 45

)

f.

Top cover (see 

Top cover on page 47

)

g.

System board (see 

System board on page 60

)

Remove the fan/heat sink assembly:

1.

Position the system board upside-down.

2.

To remove the fan/heat sink assembly, in the order indicated on the heat sink, loosen the 6

captive Phillips screws (1)-(6) that secure the heat sink to the system board.

3.

Disconnect the fan cable from the system board (7).

Component replacement procedures 67

Summary of Contents for ProBook 470 G1






















































































































































Reviews:

No comments

Related manuals for ProBook 470 G1

Brands by name

Popular brands

Load more brands