HP ProBook 450 G2, Maintenance And Service Manual, Page: 87 / 169

Fan
Description Spare part number
Fan 767433-001
NOTE: To properly ventilate the computer, allow at least 7.6 cm (3.0 in) of clearance on the left side of the
computer. The computer uses an electric fan for ventilation. The fan is controlled by a temperature sensor and
is designed to turn on automatically when high temperature conditions exist. These conditions are affected by
high external temperatures, system power consumption, power management/battery conservation
configurations, battery fast charging, and software requirements. Exhaust air is displaced through the
ventilation grill located on the left side of the computer.
Before removing the fan/heat sink assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see Battery on page 36 ), and then remove the following components:
a. Service doors (see Service door on page 37 ).
b. Hard drive ( Hard drive on page 39 )
c. Optical drive ( Optical drive on page 43 )
d. Keyboard (see Keyboard on page 49 )
e. Top cover (see Top cover on page 58 )
To remove the fan:
1. Disconnect the fan cable (1) from the system board.
Component replacement procedures 75