HP ProBook 445 G9 Maintenance And Service Manual Download Page 49

Page: 49 / 106

Loosen the five captive Phillips screws that secure the bottom cover to the computer.

Starting near the hinges, use a nonmarking, nonconductive tool (1) to release the edges of the bottom

cover from the computer (2).

Remove the bottom cover from the computer (3).

To replace the bottom cover, reverse the removal procedures.

Using a SIM card (select products only)

Use these instructions to insert a SIM card.

IMPORTANT:

You can damage the SIM card if you insert the wrong size card or insert it or the SIM card tray

in the wrong direction. The card might also become stuck in the slot. Do not use SIM card adapters. To prevent

damage to the SIM card or connectors, use minimal force when inserting or removing a SIM card.

Determining the correct SIM card size for your computer

Before purchasing a SIM card, follow these instructions to determine the correct SIM card size for your

computer.

Component replacement procedures

Summary of Contents for ProBook 445 G9











































































































Search results

Summary of Contents for ProBook 445 G9

Reviews:

Related manuals for ProBook 445 G9

Brands by name

Popular brands

HP ProBook 445 G9, Maintenance And Service Manual

Search results

Summary of Contents for ProBook 445 G9

Reviews:

Related manuals for ProBook 445 G9

Brands by name

Popular brands