HP ProBook 4320t Maintenance And Service Manual Download Page 10

Page: 10 / 108

Category

Description

Diskette
drive

Supports external USB diskette drive only

Audio/
Visual

HD audio - IDT 92HD80

Integrated microphone

Two stereo speakers

Headphone/microphone jacks

Modem

High-speed 56k modem for all regions and countries

Modem cable not included

Supports no-modem option

Ethernet

10/100/1000 Ethernet network interface card (NIC)

S3/S4/S5 wake on LAN (AC only mode)

Ethernet cable not included

Wireless

Integrated WLAN options by way of wireless module:

Support for the following WLAN formats:

●

Broadcom 802.11a/b/g/n 2×2

●

Broadcom 802.11b/g

2 WLAN antennas built into display assembly

Support for no-WLAN option

External media
cards

One ExpressCard slot (34 mm)

Media Card Reader supporting Memory Stick (MS), Memory Stick Pro (MSP), Secure Digital (SD)
Memory Card, Secure Digital High Capacity (SDHC) Memory Card, MultiMediaCard (MMC), and xD-
Picture Card formats

Ports

Audio-in (stereo microphone)

Audio-out (stereo headphone)

RJ-11 (modem)

RJ-45 (Ethernet, includes link light and activity lights)

USB 2.0 (3)

eSATA/USB 2.0 combo

HDMI

VGA (Dsub 15-pin) supporting 1600×1200 external resolution at 75-GHz (hot plug/unplug with auto-
detect)

Multi-pin AC power

Keyboard and
pointing
devices

33.8-cm

(13.3-in) keyboard with TouchPad

TouchPad supports 2-way scroll with legend; taps enabled as default

Chapter 1 Product description

Summary of Contents for ProBook 4320t













































































































Search results

Summary of Contents for ProBook 4320t

Reviews:

Related manuals for ProBook 4320t

Brands by name

Popular brands

HP ProBook 4320t, Maintenance And Service Manual

Search results

Summary of Contents for ProBook 4320t

Reviews:

Related manuals for ProBook 4320t

Brands by name

Popular brands