manualshive.com logo in svg

HP ProBook 430 G7, Maintenance And Service Manual

Share
Download
HP ProBook 430 G7 Maintenance And Service Manual Download Page 59

Touchpad assembly

Table 5-12

  Touchpad assembly description and part number

Description

Spare part number

Touchpad assembly (includes cable)

L77228-001

Before removing the touchpad assembly, follow these steps:

1.

Prepare the computer for disassembly (

Preparation for disassembly on page 34

).

2.

Place the computer in Battery Safe mode (

Battery Safe mode on page 34

).

3.

Remove the bottom cover (

Bottom cover on page 36

).

4.

Remove the battery (

Battery on page 35

).

Remove the touchpad assembly:

1.

Disconnect the cable from the ZIF connector on the touchpad (1).

2.

Lift the smaller piece of silver tape from the touchpad and remove the larger piece of silver tape from 
the top cover (2).

3.

Remove the six broad head Phillips M2.0 × 2.4 screws (3) that secure the touchpad to the computer.

4.

Lift the touchpad out of the computer (4).

Reverse this procedure to install the touchpad assembly.

Component replacement procedures

51

Summary of Contents for ProBook 430 G7























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands