background image

Country/region

Accredited agency

Applicable note number

Japan

JIS

3

The Netherlands

KEMA

1

New Zealand

SANZ

1

Norway

NEMKO

1

The People's Republic of China

CCC

4

Saudi Arabia

SASO

7

Singapore

PSB

1

South Africa

SABS

1

South Korea

KTL

5

Sweden

SEMKO

1

Switzerland

SEV

1

Taiwan

BSMI

6

Thailand

TISI

1

The United Kingdom

ASTA

1

The United States

UL

2

1.

The flexible cord must be Type HO5VV-F, 3-conductor, 0.75mm2 conductor size. Power cord set fittings (appliance coupler and 
wall plug) must bear the certification mark of the agency responsible for evaluation in the country or region where it will be used.

2.

The flexible cord must be Type SVT/SJT or equivalent, No. 18 AWG, 3-conductor. The wall plug must be a two-pole grounding type 
with a NEMA 5-15P (15 A, 125 V ac) or NEMA 6-15P (15 A, 250 V ac) configuration. CSA or C-UL mark. UL file number must be on 
each element.

3.

The appliance coupler, flexible cord, and wall plug must bear a “T” mark and registration number in accordance with the Japanese 
Dentori Law. The flexible cord must be Type VCTF, 3-conductor, 0.75mm2 or 1.25mm2 conductor size. The wall plug must be a 
two-pole grounding type with a Japanese Industrial Standard C8303 (7 A, 125 V ac) configuration.

4.

The flexible cord must be Type RVV, 3-conductor, 0.75mm2 conductor size. Power cord set fittings (appliance coupler and wall 
plug) must bear the CCC certification mark.

5.

The flexible cord must be Type H05VV-F 3X0.75mm2 conductor size. KTL logo and individual approval number must be on each 
element. Corset approval number and logo must be printed on a flag label.

6.

The flexible cord must be Type HVCTF 3X1.25mm2 conductor size. Power cord set fittings (appliance coupler, cable, and wall 
plug) must bear the BSMI certification mark.

7.

For 127 V ac, the flexible cord must be Type SVT or SJT 3 x 18 AWG, with plug NEMA 5-15P (15 A, 125 V ac), with UL and CSA or C-
UL marks. For 240 V ac, the flexible cord must be Type H05VV-F 3X0.75/1.00mm2 conductor size, with plug BS 1363/A with BSI 
or ASTA marks.

Requirements for specific countries and regions 105

Summary of Contents for ProBook 430 G4

























































































































Reviews:

Related manuals for ProBook 430 G4