HP ProBook 430 G1, Maintenance And Service Manual

Page: 50 / 139

Hard drive
NOTE: All hard drive spare part kits include a hard drive bracket and screws.
Description Spare part number
500-GB, 5400-rpm hard drive 683802-001
500-GB, 7200-rpm hard drive 703267-001
128-GB solid-state drive 737584-001
120-GB solid-state drive (M.2) 731998-001
Hard Drive Hardware Kit (includes hard drive bracket and screws) 727763-001
Before disassembling the computer, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 35 ).
5.
Remove the keyboard (see Keyboard on page 37 ).
Remove the hard drive:
1. Position the upright.
40 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts