HP ProBook 430 G1 Maintenance And Service Manual Download Page 17

Page: 17 / 139

Component

Description

(5)

Webcam

Records video and captures still photographs.

For information on using the webcam, access HP Support
Assistant. To access HP Support Assistant on the Start screen,
select the

HP Support Assistant

app.

(6)

Internal display switch

Turns off the display or initiates Sleep if the display is closed
while the power is on.

NOTE:

The display switch is not visible on the outside of the

computer.

*The antennas are not visible on the outside of the computer. For optimal transmission, keep the areas immediately around the
antennas free from obstructions. To see wireless regulatory notices, see the section of the

Regulatory, Safety, and Environmental

Notices

that applies to your country or region. To access the user guides, select the

HP Support Assistant

app on the Start

screen, select

My computer

, and then select

User guides

Display - Windows models

Summary of Contents for ProBook 430 G1












































































































































Search results

Summary of Contents for ProBook 430 G1

Reviews:

Related manuals for ProBook 430 G1

Brands by name

Popular brands

HP ProBook 430 G1, Maintenance And Service Manual

Search results

Summary of Contents for ProBook 430 G1

Reviews:

Related manuals for ProBook 430 G1

Brands by name

Popular brands