HP Pro x2 612 G1 User Manual Download Page 15

Page: 15 / 94

Components

Description

(7)

Power switch

●

When the computer is off, slide the switch to turn on

the tablet.

●

When the computer is on, slide the switch to turn off

the computer.

●

When the computer is in the Sleep state or

Hibernation, slide the switch briefly to exit Sleep or

Hibernation.

CAUTION:

Pressing and holding down the power button

will result in the loss of unsaved information.

If the tablet has stopped responding and Windows®

shutdown procedures are ineffective, press and hold the

power button for at least 14 seconds to turn off the

computer.

To learn more about your power settings: Select Start >

Control Panel > System and Security > Power Options.

(8)

Pen holder (select models only)

Holds the digital pen.

(9)

Alignment post connectors (2)

Align and attach the tablet to the power keyboard.

(10)

Micro SIM slot

Supports a micro wireless subscriber identity module

(SIM).

(11)

Docking port

Connects the tablet to the power keyboard.

(12)

Micro memory card reader

Reads optional micro memory cards that store, manage,

share, or access information.

(13)

USB 3.0 port

Connects an optional USB device, such as a keyboard,

mouse, external drive, printer, scanner or USB hub.

For details about different types of USB ports, see

Using a

USB device on page 44

(14)

Audio-out (headphone) jack/Audio-in

(microphone) jack

Connects optional powered stereo speakers, headphones,

earbuds, a headset, or a television audio cable.

WARNING!

To reduce the risk of personal injury, adjust

the volume before using headphones, earbuds, or a

headset. For additional safety information, see the

Regulatory, Safety and Environmental Notices

NOTE:

When a device is connected to the jack, the

computer speakers are disabled.

NOTE:

Be sure that the device cable has a 4-conductor

connector that supports both audio-out (headphone) and

audio-in (microphone).

NOTE:

Stand-alone microphones and headphones with

separate microphone jacks are not supported.

(15)

AC adapter/Battery light

●

White: The computer is connected to external power

and the battery is charged from 90 to 99 percent.

●

Amber: The computer is connected to external power

and the battery is charged from 0 to 90 percent.

●

Blinking amber: A battery that is the only available

power source has reached a low battery level. When

the battery reaches a critical battery level, the battery

light begins blinking rapidly.

Tablet edge components

Summary of Contents for Pro x2 612 G1































































































Search results

Summary of Contents for Pro x2 612 G1

Reviews:

Related manuals for Pro x2 612 G1

Brands by name

Popular brands

HP Pro x2 612 G1, User Manual

Search results

Summary of Contents for Pro x2 612 G1

Reviews:

Related manuals for Pro x2 612 G1

Brands by name

Popular brands