10 Using Computer Setup (BIOS)
Computer Setup, or F10 BIOS Setup (Basic Input/Output System), controls communication between
all the input and output devices on the system (such as disk drives, display, keyboard, mouse, and
printer). Computer Setup includes settings for the types of devices installed, the startup sequence of
the tablet, and the amount of system and extended memory.
NOTE:
Use extreme care when making changes in Computer Setup. Errors can prevent the tablet
from operating properly.
Starting Computer Setup
1.
Shut down the tablet.
2.
To power on the tablet, press the power and volume down buttons simultaneously.
The Startup menu is displayed.
3.
Tap F10 BIOS Setup to enter Computer Setup.
Navigating and selecting in Computer Setup
To navigate and select in Computer Setup, follow these steps:
1.
Shut down the tablet.
2.
To power on the tablet, press the power and volume down buttons simultaneously.
The Startup menu is displayed.
3.
Tap F10 BIOS Setup to enter Computer Setup.
●
Tap a menu or a menu item to select it.
●
To close open dialog boxes and return to the main Computer Setup screen, tap Escape,
and then follow the on-screen instructions.
4.
To exit Computer Setup menus without saving your changes, select Main, select Ignore
Changes and Exit, and then follow the on-screen instructions.
– or –
To save your changes and exit, select Main, select Save Changes and Exit, and then follow the
on-screen instructions.
32 Chapter 10 Using Computer Setup (BIOS)
Summary of Contents for Pro Tablet 608 G1
Page 1: ...User Guide ...
Page 4: ...iv Safety warning notice ...
Page 6: ...vi Processor configuration setting select models only ...
Page 10: ...x ...
