manualshive.com logo in svg

HP Presario 5800 Series, Maintenance & Service Manual, Page: 71 / 81

Share
Download
HP Presario 5800 Series Maintenance & Service Manual Download Page 71

United States     December 16, 2002 

 

Maintenance & Service Guide

Presario 5800 Series Personal Computers

MSG Index

 | 

Home

  |   

Preface

    |   

Product Description

   |   

Troubleshooting

   |   

Illustrated Parts 

  

   

Removal & Replacement

 |  

Jumpers & Switches

   |   

Specifications

  

 

Removal and Replacement

Removal Sequence

Chassis
Mass Storage Devices
Button Board

Digital Creativity
Imaging Center

Option Card Retainer
Graphics Board
PCI Cards
Memory

Processor

Processor Retention Clips

RTC Battery
System Board Cables

System Board
Parallel Port
Back I/O Panel

Power Supply

Removing 
the Power 
Supply

1.

Complete 

the 

preparation 
for 
disassembly 
procedures

.

2.

Remove the 
chassis

.

3.

Remove 
5.25 Inch or 
3.5 Inch 
Hard Drive.

4.

Disconnect 
System 
Board 
Cables.

5.

Disconnect 

power 

supply 

cables from 

CD/DVD, 

Zip drive, 

Diskette 

and Hard 

Drive.

6.

Remove 
Graphics 
Board

 (on 

select 

models 

only).

7.

Remove the 
Fax/Modem

.

8.

Remove 
Networking 
Interface 
Card

 (on 

select 

models 

only).

9.

Remove the 
Audio Card 

(on select 

models 

only).

10.

Remove the 
Memory.

11.

Remove the 
Processor.

12.

Remove the 
System 
Board

.

13.

Remove the 

four screws 

from the 

back of the 

unit 

and one 

screw from 

the tab.

14.

Slide the 

Power 

Supply 

toward front 

of unit and 

down to 

remove 

from 

chassis.

Replacement

To replace 

the Power 

Supply, 

reverse the 

removal 

procedure.

Back to Removal and Replacement

 

 

privacy and legal statement

Summary of Contents for Presario 5800 Series


















































































Reviews:

No comments