manualshive.com logo in svg

HP Presario 5800 Series, Maintenance & Service Manual, Page: 19 / 81

Share
Download
HP Presario 5800 Series Maintenance & Service Manual Download Page 19

United States     December 16, 2002 

 

Maintenance & Service Guide

Presario 5800 Series Personal Computers

MSG Index

 | 

Home

  |   

Preface

    |   

Product Description

   |   

Troubleshooting

   |   

Illustrated Parts 

  

   

Removal & Replacement

 |  

Jumpers & Switches

   |   

Specifications

  

 

Troubleshooting

Clearing CMOS for Models 5822, 5827, 5832, 5834 and 

5835

5800 Models with Pentium III System Board

5800 Models with Athlon System Board

If the power-on password 

is not known, clearing 

CMOS will disable the 

power-on password. To 

clear CMOS, complete the 

following steps:

 

1.

Complete the 

preparation for 
disassembly

.

2.

Remove the chassis

.

3.

To disable the 

password, move the 

jumper

at JP1 from 1-2 to 2-

3.

4.

Wait for ten seconds.

5.

Move the jumper at 

JP1 from 2-3 to 1-2.

6.

Replace the chassis 

and perform the 

appropriate 

troubleshooting.

 

 

 

privacy and legal statement

Summary of Contents for Presario 5800 Series


















































































Reviews:

No comments