upgrading and servicing the pc
9
Filename: ma1rwsc.doc Title: HP-Print2k.dot
Template: HP-Print2K.dot Author: Ann Schmidt Last Saved By: Jerry C. Stogsdill
Revision #: 198 Page: 9 of 70 Printed: 04/26/01 11:33 AM
English
A
3
Remove the side panel (see “Removing the
Side Panel” on page 7).
4
While facing the front of the computer, reach
under the top edge of the left side of the
chassis and pull the latch (
B
) out. Continue to
hold the latch in this position while you
complete the next step.
B
C
5
Grasp the top lip of the drive cage (
C
), and
pull it toward you.
6
Release the latch.
Note:
In order to slide the drive cage out sufficiently,
you may need to disconnect the cables going to
the drives. (On some cables, you may need to
press the locking lever on the connector.) Be
sure to note the placement of these connections;
you will need this information when
reconnecting the cables.
