upgrading and servicing the pc
7
Filename: ma1rwsc.doc Title: HP-Print2k.dot
Template: HP-Print2K.dot Author: Ann Schmidt Last Saved By: WASSER, Inc.
Revision #: 203 Page: 7 of 70 Printed: 04/27/01 12:42 PM
English
6
Pull the cover up and out to remove.
Note:
If you are adding a drive to the lower bay, you
must first remove its insert by pulling the right
side of the insert (
B
) toward you.
B
Warning:
Please read the ”Additional
Safety Information
” located at the end of
this document before installing and
connecting your system to the electrical
power system.
Avertissement :
Prière de lire les
consignes additionnelles de sécurité
à la
fin de ce document avant d’installer et
d’alimenter votre système informatique.
Removing the Side Panel
You must remove the side panel to access internal
components and to slide the drive cage out. You
need to remove the side panel to add memory,
replace drives, insert add-in cards, or change the
battery.
1
Turn off the computer and all peripherals.
2
Disconnect the modem/phone cable.
3
Disconnect the power cord and all other
attached cables (such as the keyboard, mouse,
and monitor).
4
Loosen the two screws on the right side of the
back panel. The first time you loosen these
screws you’ll need to use a screwdriver. (These
screws do not detach; they’ll stay on the panel
loosely until you tighten them again.)
