HP Pavilion x360 m1-u000 Maintenance And Service Manual Download Page 72

Page: 72 / 90

Power connector cable

Description

Spare part number

Power connector cable

855995-001

Before removing the power connector cable, follow these steps:

Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.

Disconnect the power from the computer by unplugging the power cord from the computer.

Disconnect all external devices from the computer.

Remove the keyboard/top cover (see

Keyboard/top cover on page 32

Disconnect the battery cable from the system board (see

Battery on page 39

Remove the system board (see

System board on page 46

Remove the power connector cable:

Detach the clips (1) on the power connector cable bracket from the tabs built into the bottom cover.

Remove the power connector cable bracket (2).

Remove the power connector cable (3) by sliding it forward, and then lifting it up.

Reverse this procedure to install the power connector cable.

Chapter 5 Removal and replacement procedures

Summary of Contents for Pavilion x360 m1-u000



























































































Search results

Summary of Contents for Pavilion x360 m1-u000

Reviews:

Related manuals for Pavilion x360 m1-u000

Brands by name

Popular brands

HP Pavilion x360 m1-u000, Maintenance And Service Manual

Search results

Summary of Contents for Pavilion x360 m1-u000

Reviews:

Related manuals for Pavilion x360 m1-u000

Brands by name

Popular brands