manualshive.com logo in svg

HP Pavilion x360 14 Series, Maintenance And Service Manual, Page: 74 / 105

Share
Download
HP Pavilion x360 14 Series Maintenance And Service Manual Download Page 74

Connector board cable

Table 5-11

  Connector board cable spare part information

Description

Spare part number

Connector board cable

L96501-001

Before removing the connector board cable, follow these steps:

1.

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn 
the computer on, and then shut it down through the operating system.

2.

Disconnect all external devices connected to the computer.

3.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then 
unplugging the AC adapter from the computer.

4.

Remove the bottom cover (see 

Bottom cover on page 39

), and then remove the following 

components:bbsf

a.

Battery (see 

Battery on page 41

)

b.

Solid-state drive (see 

Solid-state drive on page 44

)

c.

Fan (see 

Fan on page 60

)

d.

System board (see 

System board on page 62

)

e.

Connector board (see 

Connector board on page 65

)

Remove the connector board cable:

1.

Turn the system board upside down with the front toward you.

2.

Release the ZIF connector (1) to which the connector board cable is connected, and then disconnect 
the connector board cable from the system board.

3.

Release the ZIF connector (2) to which the connector board cable is connected, and then disconnect 
the connector board cable from the connector board.

66

Chapter 5   Removal and replacement procedures

Summary of Contents for Pavilion x360 14 Series










































































































Reviews:

No comments