manualshive.com logo in svg

HP Pavilion x360 14 Series, Maintenance And Service Manual, Page: 39 / 105

Share
Download
HP Pavilion x360 14 Series Maintenance And Service Manual Download Page 39

Display components

Table 3-2

  Display component spare part information

Item

Component

Spare part number

(1)

Display panel assembly (includes display bezel and display panel):

 

14.0 in, FHD, antiglare, UWVA, 400 nits touchscreen display panel assembly

L96516-001

 

14.0 in, FHD, antiglare, UWVA, 250 nits touchscreen display panel assembly

L96515-001

 

14.0 in, HD, antiglare, SVA, 220 nits touchscreen display panel assembly

L96517-001

 

Display adhesive (not illustrated, used to attach display panel assembly to display back cover)

L97984-001

(2)

Display panel cable:

 

For use only on computer models equipped with WWAN capability

L96497-001

 

For use only on computer models not equipped with WWAN capability

L96496-001

(3)

Sensor board

L96506-001

(4)

Touch control board (includes double-sided adhesive)

L96505-001

(5)

Display hinges (2, includes left and right hinges):

 

For use only on computer models equipped with an FHD display panel assembly

L96494-001

 

For use only on computer models equipped with an HD display panel assembly

L98206-001

(6)

Display hinge cover (2, includes left and right hinge covers):

 

For use only on computer models equipped with an FHD display panel assembly

L97985-001

 

For use only on computer models equipped with an HD display panel assembly

L98205-001

(7)

Wireless Antenna Kit (includes antenna cables and transceivers):

Display components

31

Summary of Contents for Pavilion x360 14 Series










































































































Reviews:

No comments