HP Pavilion x2 12-B0 Series Maintenance And Service Manual Download Page 37

Page: 37 / 78

RTC battery

Description

Spare part number

RTC battery (includes cable and double-sided adhesive)

841565-001

Before removing the RTC battery, follow these steps:

Shut down the slate. If you are unsure whether the slate is off or in Hibernation, turn the slate on,
and then shut it down through the operating system.

Disconnect all external devices connected to the slate.

Disconnect the power from the slate by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the slate.

Disconnect the slate from the keyboard/base.

Remove the display panel assembly (see

Display panel assembly on page 22

Remove the RTC battery:

Disconnect the RTC battery cable (1) from the system board.

Release the RTC battery cable from the retention clips (2) built into the battery.

Detach the RTC battery (3) from the display back cover. (The RTC battery is attached to the display
back cover with double-sided adhesive.)

Remove the RTC battery.

Reverse this procedure to install the RTC battery.

Component replacement procedures

Summary of Contents for Pavilion x2 12-B0 Series















































































Search results

Summary of Contents for Pavilion x2 12-B0 Series

Reviews:

Related manuals for Pavilion x2 12-B0 Series

Brands by name

Popular brands

HP Pavilion x2 12-B0 Series, Maintenance And Service Manual

Search results

Summary of Contents for Pavilion x2 12-B0 Series

Reviews:

Related manuals for Pavilion x2 12-B0 Series

Brands by name

Popular brands