Technical Specifications
Model u626cn
PJ504AA
Processor & Speed
2.8 GHz/400 Intel
®
Pentium
®
4 Processor – PGA478
Chipset
Intel® 848P
Motherboard
Oxford-UL6E (4PSD-LA)
RAM
256/3200 MB 400 DDR SDRAM (runs@266MHz)
Maximum
2 GB (2x1024MB DDR SDRAM)
Sockets
Two 184-pin DDR DIMMs
Size
128, 256, 512 AND 1024 MB DDR DIMMs
Free DIMM Sockets
One
Pairs Required
No
Type Supported
JEDEC unbuffered DDR SDRAM DIMM specification
Cache
8KB Data Cache + Trace Cache L1, 512 KB L2 Integrated
on Processor module
Hard Drive
80 GB (7200 RPM)
Optical Drive
CD-RW/DVD-ROM Drive 48x32x16x48
48X- Write /32X - Re-write /16x- DVD Read
48X - CD-ROM Read
Average Random Access
DVD =115ms / CD-ROM =95ms
Transfer Rate
DVD = 21.6/sec. / CD-ROM = 7.2MB/sec.
Diskette Drive
None
9 in 1 Card Reader
Compact Flash I/II, Memory Stick/PRO, MMC/SD, Smart
Media, xD, Microdrive
Fax/Data Modem
V.92 56Kbps
Fax Speed
Up to 14.4Kbps
Data Compression
V.42 bis
Error Correction
V .42
EIA Fax Commands
Class 1
Video Graphics
AGP 8X Graphics Card
Controller
nVidia FX5200XT
Video Memory
128 MB DDR, not upgradeable
Video Connectors
Composite & S-Video - PAL
Network Card
10/100 BaseT, Integrated
1394 Card
IEEE-1394, Integrated
Sound
AC’97, 6 Channel, Integrated on MB
Controller
Realtek ALC650
Chassis
Panther-Lite, 250HV+PFC PSU
USB Interface Specification
USB 2.0
External I/O
Rear Connectors
4= USB, 1=1394, Serial, Parallel,
Line-In, Line-Out; Microphone
External I/O
Front Connectors
2=USB; 1= 1394, Line In, Microphone, Headphone, 9 in 1
Card Reader w/USB
Expansion Slots (Total)
3= PCI, 1= AGP
Expansion Slots (FREE)
2= PCI
Drive Bays (Total)
Two 5.25” external, One 3.5” external,
Two 3.5” internal
Drive Bays (FREE)
One 5.25” external, One 3.5” external, One 3.5” internal
Keyboard/Mouse
One-touch Enhanced Keyboard, PS/2 Optical scrolling
mouse
Copyright Hewlett-Packard Co. 1994-2004
This information is subject to change without notice and
is provided "as is" with no warranty.
Hewlett-Packard shall not be liable for any direct,
indirect, special, incidental or consequential damages
in connection with the use of this material.