HP pavilion Series Maintenance And Service Manual Download Page 18

Page: 18 / 75

Right side

Item

Component

Description

(1)

Drive light (select products only)

●

Blinking white: The hard drive is being accessed.

●

Amber: HP 3D DriveGuard has temporarily parked
the hard drive.

(2)

USB 3.0 port

Connects an optional USB device, such as a keyboard, mouse,
external drive, printer, scanner, or USB hub.

(3)

HDMI port

Connects an optional video or audio device, such as a high-
definition television, any compatible digital or audio
component, or a high-speed HDMI device.

(4)

RJ-45 (network) jack/status lights

Connects a network cable.

●

White: The network is connected.

●

Amber: Activity is occurring on the network

(5)

Power connector

Connects an AC adapter.

(6)

AC adapter and battery light

●

White: The AC adapter is connected and the battery is
fully charged.

●

Blinking white: The AC adapter is disconnected and
the battery has reached a low battery level.

●

Amber: The AC adapter is connected and the battery
is charging.

●

Off: The battery is not charging.

Chapter 2 External component identification

Summary of Contents for pavilion Series












































































Search results

Summary of Contents for pavilion Series

Reviews:

Related manuals for pavilion Series

Brands by name

Popular brands

HP pavilion Series, Maintenance And Service Manual

Search results

Summary of Contents for pavilion Series

Reviews:

Related manuals for pavilion Series

Brands by name

Popular brands