HP PAVILION Gaming 17-ak000 Maintenance And Service Manual Download

Page: 19 / 108

Special keys

Component

Description

(1)

esc

key

Displays system information when pressed in combination with
the

key.

(2)

key

Executes specific functions when pressed in combination with
another key.

(3)

Windows key

Opens the Start menu.

NOTE:

Pressing the Windows key again will close the Start

menu.

(4)

Action keys

Execute frequently used system functions.

NOTE:

On select products, the

action key turns the keyboard

backlight feature off or on.

(5)

num lock

key

Alternates between the navigational and numeric functions on
the integrated numeric keypad.

(6)

Integrated numeric keypad

A separate keypad to the right of the alphabet keyboard. When

num lock

is pressed, the keypad can be used like an external

numeric keypad.

NOTE:

If the keypad function is active when the computer is

turned off, that function is reinstated when the computer is
turned back on.

Keyboard area

Summary of Contents for PAVILION Gaming 17-ak000













































































































Search results

Summary of Contents for PAVILION Gaming 17-ak000

Reviews:

Related manuals for PAVILION Gaming 17-ak000

Brands by name

Popular brands

HP PAVILION Gaming 17-ak000, Maintenance And Service Manual

Search results

Summary of Contents for PAVILION Gaming 17-ak000

Reviews:

Related manuals for PAVILION Gaming 17-ak000

Brands by name

Popular brands