HP Pavilion DV9500 Maintenance And Service Manual Download Page 26

Page: 26 / 177

Item

Component

Function

(7)

HDMI port (select models only)

Connects an optional video or audio device such as a high-
definition television, set-top box, DVD player, or any
compatible digital or audio device.

(8)

USB ports (1 or 2, depending on computer model)

Connect optional USB devices.

NOTE:

Depending on your computer model, the

computer may include an HDMI port or a USB port.

(9)

1394 port (select models only)

Connects an optional IEEE 1394 or 1394a device, such as
a camcorder.

(10)

Digital Media Slot light (select models only)

On: A digital card is being accessed.

(11)

Digital Media Slot (select models only)

Supports the following optional digital card formats:

●

Memory Stick (MS)

●

Memory Stick Pro (MSP)

●

MultiMediaCard (MMC)

●

Secure Digital Input/Output (SD I/O)

●

Secure Digital (SD) Memory Card

●

xD-Picture Card (XD)

●

xD-Picture Card (XD) Type H

●

xD-Picture Card (XD) Type M

Chapter 2 External component identification

Summary of Contents for Pavilion DV9500


















































































































































































Search results

Summary of Contents for Pavilion DV9500

Reviews:

HP Pavilion DV9500, Maintenance And Service Manual, Page: 26 / 177

Search results

Summary of Contents for Pavilion DV9500

Reviews: